background image

www.Lanzar.com

2

FEATURES

Bass Driver

The 

HTGBD1

 contains a Bass Driver circuit that accurately recreates and injects 

Low frequency information back into the signal path. 
What that means in everyday terms is that the 

HTGBD1

 will give more bass 

impact to your best compact discs or even your old tapes.

Bass Equalization Circuit

The 

HTGBD1

 has a unique equalization circuit that contours the restored bass to 

your speaker systems.

Dash Mount Remote Control

The 

HTGBD1

 comes with a Dash Mountable Remote Control that allows you to 

enjoy the effects of the 

HTGBD1

 without having to leave the driver’s seat.

The 

Dash Mount Control

 has a LED indicator, this LED will grow brighter as you 

add more bass or dimmer when you decrease it.

Bass Maximize Indicator

Not only does The 

HTGBD1

 provide good music to your ears, but it also gives you 

some visual enjoyment as well. On the Chassis of the 

HTGBD1

, there are three 

LED indicators that flashes when the bass maximization circuit is activated.

PFM Subsonic Filter Switch

This unique feature is legendary with its ability to fine tune the bass response of 
any system. Why waste power on nasty subsonic information when 

PFM

 Subsonic 

Filter Switch can help you to clean things up?

Bass Output Control

The 

HTGBD1

 has the ability to produce large amount of deep, mind shattering 

bass without damaging your speakers. The Bass Output Control circuit allows the 

HTGBD1

 to maximize the bass output of any auto sound audio system while 

restraining destructive bursts.

Summary of Contents for Heritage HTGBD1











Reviews: