Set the dose and inject
1
Set the required dose.
If you turn past the unit
you want to inject,
simply turn back to the
correct unit.
Inject your dose in the way that your diabetes
nurse or doctor showed you. Stick the needle
into your skin and press the injection button all
the way in. As you inject, the dose window
counts down to “0”.
4
Once you have injected
N
B
!
Always remove the needle after an injection
and store the ClikStar without a needle. This
helps to prevent contamination, air bubbles
and insulin leakage.
2
3
Keep the injection button depressed for a
count of 10, then pull the
needle out.
10 sec.
Put on the outer
needle cap and
unscrew the needle.
Dispose of the needle
as instructed.
Replace the pen cap
on your ClikStar and
store in a safe place.
Summary of Contents for clickstar
Page 1: ...ClikSTARquick guide ...
Page 7: ...Ownnotes ...