Lantronix xSenso 2100 User Manual Download Page 3

Page: 3 / 92

xSenso 2100 User Guide

Table of Contents

List of Figures _____________________________________________________________9
List of Tables _____________________________________________________________10

1: Using This Guide

Purpose and Audience  _____________________________________________________12
Summary of Chapters  ______________________________________________________12
Additional Documentation  ___________________________________________________13

2: Introduction

Key Features _____________________________________________________________14
Applications ______________________________________________________________14
Protocol Support _________________________________________________________14
Troubleshooting Capabilities _________________________________________________15
Configuration Methods _____________________________________________________15

Configuration Using the MGMT (USB) Port __________________________________15

Addresses and Port Numbers ________________________________________________16

Hardware Address  _____________________________________________________16
IP Address  ___________________________________________________________16
Port Numbers  _________________________________________________________16

Product Information Label ___________________________________________________17

3: Installation of xSenso 2100

Package Contents _________________________________________________________18
User-Supplied Items _______________________________________________________18
Hardware Components _____________________________________________________18

Front/Top Panel  _______________________________________________________18
Side Panel  ___________________________________________________________21
Back Panel  ___________________________________________________________21

Installing the xSenso _______________________________________________________22

4: Using DeviceInstaller

Accessing xSenso Using DeviceInstaller _______________________________________23
Device Detail Summary _____________________________________________________23

Summary of Contents for xSenso 2100





























































































Search results

Summary of Contents for xSenso 2100

Reviews:

Lantronix xSenso 2100, User Manual, Page: 3 / 92

Search results

Summary of Contents for xSenso 2100

Reviews: