Lantronix
TN-SFP-xx25G-xR-S Series User Guide
33815 Rev. C
Page 11 of 16
SFP Information and SFP Detail Info
Note:
This feature is not available on all devices and may vary between products. See the related manual for
more information.
SFP Information
This page displays general SFP information and monitoring information as shown and described below.
Parameter descriptions
:
Parameter
Description
Port
The logical port for the settings contained in the same row.
Tx Central
Wavelength
Displays the nominal transmitter output wavelength in nm.
Bit rate
Displays the nominal bit rate of the transceiver.
Temperature
Displays the internally measured transceiver temperature. Temperature accuracy is
vendor specific but must be better than 3 degrees Celsius over specified operating
temperature and voltage.
Vcc
Displays the internally measured transceiver supply voltage. Accuracy is vendor
specific but must be better than 3 percent of the manufacturer's nominal value over
specified operating temperature and voltage. Note that in some transceivers,
transmitter supply voltage and receiver supply voltage are isolated. In that case,
only one supply is monitored. Refer to the device specification for more detail.
Mon1 (Bias)
Displays the measured TX bias current in uA. Accuracy is vendor specific but must
be better than 10 percent of the manufacturer's nominal value over specified
operating temperature and voltage.
Mon2 (TX PWR)
Displays the measured coupled TX output power in mW. Accuracy is vendor
specific but must be better than 3dB over specified operating temperature and
