13: Maintenance
SLC™ Console Manager User Guide
230
Diagnostics
The
page provides methods for diagnosing problems such as network
connectivity and device port input/output problems. You can use equivalent commands on the
command line interface. An additional diagnostic, loopback, is only available as a command.
1.
Click the
Maintenance
tab and select the
Diagnostics
option. The following page displays:
Figure 13-7 Maintenance > Diagnostics
2.
Select
Diagnostics
from checklist (one or more diagnostic methods you want to run, or select
All to run them all):
ARP Table
Address Resolution Protocol (ARP) table used to view the IP address-to-hardware
address mapping.
Netstat
Displays network connections. If you select the checkbox, select the
TCP
or
UDP
protocol, or select
All
for both protocols to control the output of the Netstat report.
Host Lookup
Select to verify that the SLC console manager can resolve the host name into an IP
address (if DNS is enabled). If selected, also enter a host name in the corresponding
Hostname field,
Summary of Contents for SLC8
Page 1: ...Part Number 900 449 Revision J July 2014 SLC Console Manager User Guide SLC8 SLC16 SLC32 SLC48...
Page 95: ...8 Device Ports SLC Console Manager User Guide 95 Figure 8 4 Device Ports Settings...
Page 217: ...13 Maintenance SLC Console Manager User Guide 217 Figure 13 1 Maintenance Firmware Config...
