Lantronix SLC16 User Manual Download

Page: 345 / 351

Appendix I: LDAP Schemas

SLC™ Console Manager User Guide

345

Figure I-9 Create New Attribute Object Window

For the OID, enter

1.3.6.1.4.1.244.100.10

Enter anything for the description.

Change the Syntax: pull-down menu to Unicode String.

Click on OK.

Adding the Attribute to the Users Group in Windows

Highlight the Classes folder in the console tree on the left.

Figure I-10

shows the files that

display.

Figure I-10 Classes Folder

In the right pane, scroll down to user.

Figure I-11

shows the window that displays.

Summary of Contents for SLC16
































































































































































































































































































































































Search results

Summary of Contents for SLC16

Reviews:

Related manuals for SLC16

Brands by name

Popular brands

Lantronix SLC16, User Manual

Search results

Summary of Contents for SLC16

Reviews:

Related manuals for SLC16

Brands by name

Popular brands