Lantronix SLC 8000 Series User Manual Download

Page: 62 / 425

SLC™ 8000 Advanced Console Manager User Guide

5: Web and Command Line Interfaces

The SLC advanced console manager offers three interfaces for configuring the SLC unit: a

command line interface (CLI), a web interface, and an LCD with keypad buttons on the front panel.

This chapter discusses the web and command line interfaces.

Note:

See

Chapter 4: Quick Setup on page 50

for instructions on using the LCD front

panel to configure basic network settings, Web Manager, and CLI to perform quick setup.

Web Manager

A Web Manager allows the system administrator and other authorized users to configure and

manage the SLC 8000 advanced console manager using most web browsers (Firefox, Chrome or

Internet Explorer web applications with the latest browser updates). The SLC unit provides a

secure, encrypted web interface over SSL (secure sockets layer).

Note:

The web server listens for requests on the unencrypted (HTTP) port (port 80) and

redirects all requests to the encrypted (HTTPS) port (port 443). Web Telnet and Web SSH

features (utilized in SLC console managers with firmware 7.2.0.0 or earlier) require Java

1.1 (or later) support in the browser.

The following figure shows a typical web page:

Figure 5-1 Web Page Layout

Logout Button

Tabs

Options

Entry Fields

and Options

Dashboard

Icons

Help

Button

Summary of Contents for SLC 8000 Series










































































































































































































































































































































































































































Search results

Summary of Contents for SLC 8000 Series

Reviews:

Related manuals for SLC 8000 Series

Brands by name

Popular brands

Lantronix SLC 8000 Series, User Manual

Search results

Summary of Contents for SLC 8000 Series

Reviews:

Related manuals for SLC 8000 Series

Brands by name

Popular brands