Lantronix SLC 8000 Series User Manual Download Page 34

Page: 34 / 425

SLC™ 8000 Advanced Console Manager User Guide

3: Installation

This chapter provides a high-level procedure for installing the SLC advanced console manager

followed by more detailed information about the SLC connections and power supplies.

Caution:

To avoid physical and electrical hazards, please read

Appendix A: Security Considerations on page 416

before installing the

SLC 8000 advanced console manager.

What's in the Box

Table 3-1

lists all included components that come in the box and their corresponding part

numbers.

Table 3-1 What’s in the Box

Notes:



Accessories that can be ordered separately are listed below in

Table 3-2

. Regional

power cords are available as accessories.



SLC 8000 single and dual AC supply variants ship with 110V North American AC

power cord(s).



* TAA Compliant models available, replace the “S” with “G” in the SKUs above, (e.g.

SLC80321201G for 16-Port RS-232 (RJ45) Single AC Supply).

Part Number

Component Description

SLC 8000 Advanced Console Manager Models

Part number

depends on SLC

model.*

SLC 8000 Advanced Console Manager

Note:

*Please visit

https://www.lantronix.com/products/lantronix-slc-8000/#tab-order

view available SLC models and configurations. See

Customize an SLC 8000 on page 35

Cables

200.2070A

RJ45 to DB9F Adapter

200.0062

RJ45 to RJ45, Cat5, 6.6 ft (2 m)

Note:

Not available with SFP fiber versions.

500-153

RJ45 Loopback Plug

North American Power Cords

500-041-R

For AC Supply Models, USA & Canada: 110V AC Power Cord,

8 ft (2.43 m), RoHS.

Note:

Power cords for other international regions are available and sold separately. See

Table 3-2

083-152-R

For DC Supply Models, USA & Canada: the DC Installation Kit is included.

Summary of Contents for SLC 8000 Series










































































































































































































































































































































































































































Search results

Summary of Contents for SLC 8000 Series

Reviews:

Brands by name

Popular brands

Lantronix SLC 8000 Series, User Manual

Search results

Summary of Contents for SLC 8000 Series

Reviews:

Brands by name

Popular brands