Lantronix SecureLinx SLK Series, User Manual

Page: 27 / 160

Installing the SLK
SecureLinx SLK Remote KVM User Guide 3-3
The following items are optional:
❖
Serial devices and cables, if you want to control serial devices with the SLK.
❖
A KVM switch.
❖
A 19-inch rack and mounting hardware, if you want to rack-mount the SLK. For
more information, see
“Rack-Mounting the SLK” on page 3-10 .
Hardware Description
The following sections describe the front and back panels of the SLK1, SLK8, and
SLK16.
SLK1 Front and Back Panels
Figure 3-1 shows the front panel of the SLK1, and Table 3-2 describes the front
panel components.
Figure 3-1. SLK1 Front Panel
Table 3-2. SLK1 Front Panel Description
Figure 3-2 shows the back panel of the SLK1, and Table 3-2 describes the back
panel components.
1 10/100 Speed LED:
Green = 100 Base-T connection
Orange = 10 Base-T connection
2 Link/Activity LED:
ON = good connection
OFF = no connection
Blinking = network activity
❶
❷