3. CONNECT TO WEB MANAGER
1.
Connect to SSID
PW2050-XXXX, where
XXXX refers to the SN
on the evaluation board.
Continue with the rest of the unit configuration using the Web User
Interface(UI). Context sensitive help is available in-line within the Web UI.
Note:
Please change the admin access password from the factory
default password.
The unit can also be configured using the Command Line Interface (CLI).
The CLI is accessible via Telnet/SSH or via the Serial Port.
For detailed instructions, please refer to the PremierWave 2050 User
Guide and Command Reference Guide:
http://www.lantronix.com/
support/downloads.
4. COMPLETE THE CONFIGURATION
© 2016 Lantronix, Inc. Lantronix and PremierWave are registered trademarks of Lantronix, Inc. All other trademarks are the property of respective owners. Specifications subject to change without
notice. 900-773-R Rev A
Contact
Technical Support
For technical support queries, visit
http://www.lantronix.com/support
or call (800) 422-7044 Monday – Friday from 6:00 a.m. – 5:00 p.m., Pacific
Time, excluding holidays.
Latest Firmware
For the latest firmware downloads, visit
http://www.lantronix.com/support/downloads
IP Address Assignment Tutorial
To view a tutorial on how to assign an IP address, visit
http://www.lantronix.com/support/tutorials
The steps below outline mechanism to access the web manager in order to configure the PremierWave 2050 device.
PremierWave® 2050 Quick Start Guide
3.
In the Quick Setup page, bridging and wireless interfaces can be
configured. Bridging can be enabled and the Premierwave 2050
can be connected to a network from the list of available wireless
networks.
2.
Connect to 192.168.0.1
using your browser.
The default
USER
ID = admin
and
PASSWORD = PASS
(both are case
sensitive)
4.
Your initial setup is
now complete and
the Premierwave
2050 is now
configurable through
the web manager.