Open
-
Q
™
865 Development Kit
Quick Start Guide
Specifications are subject to change - 895-0047-00 Rev. B
SOM Installation and Development Kit Setup
CAUTION: The SOM and Dev Kit are susceptible to damage from
static discharge.
1.
At a
static
-
safe workstation
, remove the development kit board and the SOM
carefully from their antistatic bags.
Do not apply power
until after following the
steps below to install the SOM, connect the antenna cables, and install the heatsink.
2.
SOM Installation:
To prevent damage, be gentle while inserting the SOM onto the
carrier board. Ensure that the three board
-
to
-
board connectors are properly aligned
between the SOM and carrier board before applying any force. Then apply vertical
force only along both long edges of the SOM above the board
-
to
-
board connectors.
Force should be applied on the indicated locations (see figure below) until the SOM
is fully seated on the carrier board connectors. For further information and removal
instructions refer to the Development Kit User Guide document.
3.
Antenna Connection:
After the
SOM is installed onto the carrier
board, connect the two WLAN/BT
antenna cables (32/33) to the SOM
as shown on page 1. Gently align
the U.FL cable connectors over top
of the corresponding SOM
connectors and then apply gentle
vertical pressure on top until you feel
them click into place.
4.
Heatsink Installation:
A stick
-
on
heatsink for the Qualcomm SoC is included with the development kit. It is safe to
operate the SOM without the heatsink installed but the processor performance may
be limited. For better thermal performance, install the heatsink on top of the SoC by
removing the adhesive covering and sticking the heatsink on top of the SoC (34).
5.
Power Up:
Connect the AC Power Adapter to the 12V DC Jack (1), connect a PC
with serial console program to the USB debug UART connector (11), and then press
and hold the power button (5) until you see the boot indicator LED light (~3
seconds).
6.
Further Information:
Refer to the SW release notes and Development Kit User
Guide for your specific SOM and SW package for more information about supported
features, connecting peripherals, and how to log in.
Development Kit Support
Documentation and software
To access the documentation (schematics, user guides, datasheets, programming
guides, tech notes
…),
platform BSP software and much more, please register at:
Technical Support
Should you require more information or assistance, you can contact us at:
https://www.lantronix.com/support
Lantronix also provides technical information and videos on Qualcomm processors
at:
https://www.lantronix.com/resources
Should you require additional technical support for your Development Kit you can
easily purchase a technical support package from the Lantronix store:
Thank you for purchasing an Open
-
Q 865 Development Kit
The Lantronix Team
PRESS HERE
PRESS HERE
