Lantronix
OCA-P181610 Install Guide
33812 Rev. D
Page
12
of
17
Connecting the Magnetic Door Contact Switch
A magnetic door contact switch is included in the cabinet. Use of the door contact switch typically requires a 12-
24VDC power source. The Lantronix PS-DC-DUAL-5624T Dual Industrial Power Supply or the EDCA-DIO-01
Enclosure Door Contact Alarm can provide the required power for the door contact switch. Follow the instructions
in your Ethernet Switch manual (if Ethernet Switch includes alarm input/outputs) or the optional Enclosure Door
Contact Alarm manual for connecting alarm input/outputs to the door contact switch.
Note
: If making further modifications to this cabinet, please note the following Cautions and Warnings.
Cautions and Warnings
Warning
: Cancer and Reproductive Harm. See
https://www.p65warnings.ca.gov/
Use Listed Conduit Hubs or connectors with environmental rating appropriate for the end-use.
Bonding between connections is not automatic and must be provided as a part of the installation.