Lantronix MSS4-D, Installation Manual

Page: 29 / 95

Getting Started Outbound Connections
3-9
3.4 Outbound Connections
When logged into the MSS, users can make basic outgoing connections using the methods
described in this section. See the MSS Reference Manual on the CD-ROM for more
information about incoming and outgoing connections.
Note: If you Telnet into the MSS, you cannot make outgoing connections.
To start an outgoing Telnet session, type Telnet at the Local> prompt, followed by either
the host’s name or its numeric IP address.
Figure 3-16: Telnet Connection
3.5 Logout
To manually log out of the MSS, type Logout or Logout Port at the Local> prompt, or
press Ctrl-D.
Figure 3-17: Logging out of the MSS
Local> TELNET 192.0.1.66
Local> LOGOUT