6
Q u i c k S t a r t G u i d e
M S S 1 0 0 / M S S - V I A / M S S 4
W W W . L A N T R O N I X . C O M
7
IP ADDRESSING
Your unit must have a unique IP address on your network.
The systems administrator generally provides the IP address. The IP address
must be within a valid range, unique to your network, and in the same subnet
as your PC. You’ll need the following information before you set up the unit.
(See Assign IP.)
IP Address:
___ ___ ___ ___
Subnet Mask:
___ ___ ___ ___
CONNECT
1) Mount or place the MSS in a secured room.
2) Connect serial devices to the serial ports.
3) Connect your network to the MSS (via one of its Ethernet ports or
the PCMCIA slot, if applicable).
4) Connect the power supply to the MSS.
5) Wait about 30 seconds.
6) Confirm the following:
a) OK LED blinks green
b) Link LED glows green
7) If the MSS is connected to the network via the PC card slot or Ethernet,
confirm the following:
a) PC Card LED glows green
b) 100 LED glows green if there is a 100Mb connection
9-30VDC
Reset
Screw Block
Power Connector
Serial 1
Console
Serial 2
Serial 3
Serial 4
10/100BaseT
Link
OK
Serial1
Serial2
Serial3
Serial4
RJ45
Ethernet
Port
DB9 Serial
Console Port
DB9 Serial Ports
DSR
RTS
CTS
TX
GND
RX
DTR
1
6
5
9
MSS4 FRONT
DB9 RS-232 SERIAL CONNECTOR
MSS4
