Lantronix MSS1-T, Reference Manual

Page: 73 / 117

Commands Change LAT Groups
6 - 13
6.24 Change LAT Groups
Establishes the list of group numbers denoting services provided by the MSS. Groups are
numbered from 0 to 255. Commas can be used to separate individual groups, and hyphens can be
used to denote ranges of groups.
Restrictions
Requires privileged user status.
Parameters groupList
Specify a list of groups to replace the current list.
Default
0 (only group zero is configured)
Examples
CHANGE LAT GROUPS 17,21-28,118-211,220
See Also
LAT, page 5-6; Change LAT Identification, page 6-13.
6.25 Change LAT Identification
Sets the text string that identifies the MSS on LAT networks.
Restrictions Requires privileged user status.
Parameters identString
A string of 40 characters or less. Identification strings must be enclosed in
quotes if they contain lower-case letters, spaces, or punctuation.
6.26 Change Loadhost
Specifies the host to be used for TCP/IP downloads to provide the MSS with runtime code.
Restrictions
Requires privileged user status.
Parameters Secondary
Configures a secondary loadhost to be used when the primary loadhost is
unavailable.
IPaddress
Specify a host using standard numeric format—host names cannot be
resolved via a nameserver. Specifying an IP address of 0.0.0.0 removes the
previously-defined gateway.
CHANGE LAT GROUPS groupList
CHANGE LAT IDENTIFICATION identString
CHANGE SECONDARY LOADHOST IPaddress