Lantronix MSS1-T, Reference Manual

Page: 53 / 117

Using the MSS Interactive Connections
5 - 7
5.2.3.4 Show Node LAT/SPX
This command shows the LAT or SPX nodes that the MSS can see. For LAT, the name of each
service node is listed along with its identification string and availability. For SPX, node
information includes each node’s socket number, hop count, frame type, and status.
5.2.3.5 Show Ports
This command displays the configuration and connection status of the serial port. Settings such as
flow control, baud rate, parity, and default hosts are shown. In addition, users can view the port
access type and login status. Errors are summarized, although in less detail than those shown by
the Show Server Counters command.
5.2.3.6 Show Server Bootparams
This command displays MSS identification and boot procedure information. The first lines display
the MSS version, hardware address, network name and node number, identification string, and
how long the MSS has been running. Software and ROM versions, configured loadhosts, and
startup files are also displayed.
5.2.3.7 Show Server Characteristics
This command displays network-related server identification information including the MSS’s
hardware address, node address, IP address, domain, any configured gateways and nameservers,
and the subnet mask. In addition, inactivity and retransmission limits, password restrictions, and
the types of incoming logins permitted are shown.
5.2.3.8 Show Server Counters
This command enables the system administrator to view quantitative information about send and
receive errors. It also displays error information for the Ethernet and TCP/IP protocols that can be
used to diagnose network transmission problems.
5.2.3.9 Show Services
This command displays characteristics of LAT services offered on the network. Information
shown includes service names, service ratings, group codes, offering nodes, service identification
strings, and availability.
5.2.3.10 Show Sessions
This command displays information about current sessions including each active port, user, and
type of session.
5.2.3.11 Show Users
This command displays the name, port number, and connection status of all current users, or a
specified user.