Chapter 10. D2Sphere Commands
–
Use AT+CGSN command to get the IMEI of the device :
AT+CGSN
357364080023467
OK
–
Set the name of the device using the
AT#DVNAME
command
–
Set the IP address and the port of the D2sphere server using the
AT#IPD2S
command
–
Enable the connection of the device to the data network. The IP address of the device should be
public.
–
Enable D2sphere support on the modem using the
AT#D2S=1
command
–
Log in to D2sphere (account need to be created by Lantronix)
–
Go to the “administrate” page, which shows a list of all devices under the control of the current user
–
Press “Add” at the upper right. Fill in the IMEI of the device to be added. Press Register.
–
Refresh the administrate page. Note that it may take a few minutes for the device to be registered,
and then a few more minutes for information about the device to be obtained.
10.5
Operation of D2sphere
The most updated information are on the following web pages. Note that some items on the list of com-
mands or supported operations listed on the web pages may not be available on all platforms - please check
with the technical support team:
–
D2Sphere Console Commands: https://git.falcom.de/pub/wiki/wikis/d2s_wiki_console_cmd
M110 Series Cellular Modem mPACK Command Reference
45
