15: Maintenance
EMG™ Edge Management Gateway User Guide
343
3. Click the
View Log
button. Your specified system log displays. For example, if you select the
type
All
and the level
Error
, the EMG unit displays a log similar to this:
Figure 15-4 View System Logs
From a queried system log (e.g.,
), you may email this information to a specific
individual or to Lantronix Technical Support. See
Emailing Logs and Reports (on page 352)
.
To clear system logs:
1. From the
Maintenance - System Logs
.
2. Click the
Clear Log
button to clear all log information.
System Log Commands
Go to
to view CLI commands which correspond to the web page entries
described above.
Ending at
Select the endpoint of the range you want to view:
End of Log:
to view the log from the latest available ending time and date.
Date:
to view the log up to the last available log ending date and time.
Summary of Contents for EMG Series
Page 100: ...7 Networking EMG Edge Management Gateway User Guide 100 Figure 7 5 Network Wireless Settings...
Page 353: ...15 Maintenance EMG Edge Management Gateway User Guide 353 Figure 15 12 About EMG...
Page 474: ...EMG Edge Management Gateway User Guide 474 Figure E 3 EU Declaration of Conformity...
Page 475: ...EMG Edge Management Gateway User Guide 475 Figure E 4 EU Declaration of Conformity continued...
