Lantronix EMG 8500 Page 305 User Manual Download

Page: 305 / 416

14: Maintenance

EMG™ Edge Management Gateway User Guide

305

Events Commands

Go to

Events Commands

to view CLI commands which correspond to the web page entries

described above.

Banners

The

Maintenance > Banners

page allows the system administrator to customize text messages

that display to users.

To configure banner settings:

1. Click the

Maintenance

tab and select

Banners

option.

Figure 14-14 Maintenance > Banners

2. Enter the following fields.

Welcome Banner

The text to display on the command line interface before the user logs in. May

contain up to 1024 characters. Single quote and double quote characters are not

supported.

Welcome to the EMG

is the default.

Note:

To create more lines use the

character sequence.

Login Banner

The text to display on the command line interface after the user logs in. May

contain up to 1024 characters. Single quote and double quote characters are not

supported. Default is blank.

Note:

To create more lines, use the \

character sequence.

Logout Banner

The text to display on the command line interface after the user logs out. May

contain up to 1024 characters. Single quote and double quote characters are not

supported. Default is blank.

Note:

To create more lines use, the

character sequence.

Summary of Contents for EMG 8500

































































































































































































































































































































































































































Search results

Summary of Contents for EMG 8500

Reviews:

Related manuals for EMG 8500

Brands by name

Popular brands

Lantronix EMG 8500, User Manual

Search results

Summary of Contents for EMG 8500

Reviews:

Related manuals for EMG 8500

Brands by name

Popular brands