15: Maintenance
EMG™ Edge Management Gateway User Guide
344
Audit Log
page displays a log of all actions that have changed the
configuration of the EMG. The audit log is disabled by default. Use the
page (
) to enable the audit log and to configure its maximum size.
Each entry in the log file contains a date/time stamp, user login, and the action performed by the
user. The user may clear the log file and sort the log by date/time, user, and command. The audit
log is saved through EMG reboots.
1. Click the
Maintenance
tab and select the
Audit Log
option. The following page displays:
Figure 15-5 Maintenance > Audit Log
2. To select a sort option, click the appropriate button:
-
To sort by date and time, click the sort by
Date/Time
button (this is the default.)
-
To sort by user, click the
sort by
User
button.
-
To sort by command/action, click the sort by
Command
button.
3. To email this log, follow the instructions in
Emailing Logs and Reports (on page 352)
.
4. To clear the log, click the
Clear Log
button.
5. To freeze or stop automatic refreshing of the log, click the
Stop Refresh
button.
Audit Log Commands
Go to
to view CLI commands which correspond to the web page entries
described above.
Summary of Contents for EMG 7500
Page 100: ...7 Networking EMG Edge Management Gateway User Guide 100 Figure 7 5 Network Wireless Settings ...
Page 353: ...15 Maintenance EMG Edge Management Gateway User Guide 353 Figure 15 12 About EMG ...
Page 474: ...EMG Edge Management Gateway User Guide 474 Figure E 3 EU Declaration of Conformity ...
Page 475: ...EMG Edge Management Gateway User Guide 475 Figure E 4 EU Declaration of Conformity continued ...
