8: Services
EMG™ Edge Management Gateway User Guide
174
Figure 8-13 Services > ConsoleFlow
2. Enter the following:
ConsoleFlow Client
Enables or disables the ConsoleFlow client. This option is enabled by default,
unless an EMG is not configured with a Device ID. When the client is enabled, it
will attempt to register with the
Registration Host
. If this is successful, the
client will attempt to establish a connection with the
Messaging Host
. The
General log (see
SSH/Telnet/Logging on page 147
) will contain messages
about connections made to the Registration Host and Messaging Host.
Status
of Client
displays the last time of actions performed by the client. Note that
when the client is disabled, it may take as long as 30 seconds for the client to
terminate, depending on what actions the client was performing at the time it
was disabled.
Interval between status
updates
Number of minutes between status updates sent from the client to the server.
Valid values are 1 - 60 minutes. The default is 2 minutes.
Summary of Contents for EMG 7500
Page 100: ...7 Networking EMG Edge Management Gateway User Guide 100 Figure 7 5 Network Wireless Settings ...
Page 353: ...15 Maintenance EMG Edge Management Gateway User Guide 353 Figure 15 12 About EMG ...
Page 474: ...EMG Edge Management Gateway User Guide 474 Figure E 3 EU Declaration of Conformity ...
Page 475: ...EMG Edge Management Gateway User Guide 475 Figure E 4 EU Declaration of Conformity continued ...
