8: Services
EMG™ Edge Management Gateway User Guide
160
Note:
WebTelnet is not available from the Dashboard. See
as the
dashboard may vary in appearance
.
-
Secure Lantronix Page
Click the
Services
tab, then click the
Secure Lantronix Network
.)
Select the port you want to configure. Enabled port numbers are in bright green boxes and
will allow you to select either a
WebSSH
or a
WebTelnet
session. The SSH or Telnet
popup window appears depending on what is clicked.
Note:
Port numbers that are disabled are in dark green boxes; clicking a
disabled port number generates a popup window indicating the port is disabled
Figure 8-7 Disabled Port Number Popup Window
2. Click your mouse into the CLI login interface that appears (see
) and login. The CLI
interface will indicate when your connection is established.
3. To terminate the session, use either the host's logoff command, or use
^]
to terminate a
Telnet session or
~.
to terminate an SSH session.
Browser Issues
Please review the Lantronix Knowledge Base at
http://ltxfaq.custhelp.com/app/answers/list
to
research any browser errors.
To configure how secure Lantronix devices are searched for on the network:
1. Click the
Search Options
Services > Secure Lantronix Network
page. The following web page displays:
Summary of Contents for EMG 7500
Page 100: ...7 Networking EMG Edge Management Gateway User Guide 100 Figure 7 5 Network Wireless Settings ...
Page 353: ...15 Maintenance EMG Edge Management Gateway User Guide 353 Figure 15 12 About EMG ...
Page 474: ...EMG Edge Management Gateway User Guide 474 Figure E 3 EU Declaration of Conformity ...
Page 475: ...EMG Edge Management Gateway User Guide 475 Figure E 4 EU Declaration of Conformity continued ...