12: Management Interface Settings
EDS-MD® Medical Device Server User Guide
93
Using the CLI
To enter the XML command level:
enable -> xml
Using XML
Not applicable.
XML: Import Configuration
Here you can import a system configuration from an XML file.
The XML data can be imported from a file on the file system or pasted into a CLI session. The
groups to import can be specified at the command line, the default is all groups.
Configuration from External File
This import option requires entering the path and file name of the external XCR file you want to import.
Configuration from Filesystem
This import option picks up settings from a file and your import selections of groups, lines, and
instances. The list of files can be viewed from the filesystem level of the CLI.
Line(s) from single line Settings on the Filesystem
This import option copies line settings from an the input file containing only one Line instance to all
of the selected Lines.
Table 12-6 Import Configuration from Filesystem Settings
Import Configuration from
Filesystem Settings
Description
Filename
Enter the name of the file on the EDS-MD unit (local to its filesystem) that
contains XCR data.
Lines to Import
Select filter instances to be imported in the line, serial, tunnel and terminal
groups. This affects both Whole Groups to Import and Text List selections.
Click
Clear All
to clear all checkmarks, or
Select All
to check all
checkmarks.
Whole Groups to Import
Select the configuration groups to import from the XML configuration
record. This option imports all instances of each selected group. Click
Clear All
to clear all checkmarks, or
Select All but Networking
to check
all checkmarks except Networking.
Import (button)
Click
Import
after selecting the
XML: Import Configuration
settings.
