Lantronix EDS-MD Series, Command Reference Manual

Page: 21 / 738

4: Configuration Using XML
EDS-MD® Wired IoT Device Gateway Command Reference 21
XML Configuration Groups
Table 4-7 lists the EDS-MD 4/8/16 wired IoT device gateway XCR groups in alphabetical order.
This table indicates the various group items, as well as some possible value names and options.
Note: Any instance of &#60 in the table may be read as "less than" and any instance of
&#62 may be read as "greater than".
Table 4-7 XCR Groups
Group Name Group Item Value Name Value Options Additional
Information
action:instance
(“instance” attribute
is “ethN link state
change”) delay N seconds, where N
is an integer that
represents the delay
in seconds Default: 5 seconds
email alarm email None or Email N
where N is an integer
between 1 and 16
that represents the
email profile number
alarm message
alarm reminder
interval <None> or N
where N is an integer
that represents the
interval in minutes Default:
<None>
normal email None or Email N
where N is an integer
between 1 and 16
that represents the
email profile number
normal message
normal reminder
interval <None> or N
where N is an integer
that represents the
interval in minutes Default:
<None>
ftp put reminder interval <None> Default:
<None>
mode Default: Simultaneous
connection N host
connection N port Default: 21
connection N
filename Default: data.txt
connection N protocol Default: FTP
connection N
username Default: anonymous
connection N
password