Lantronix EDS-MD Series, Command Reference Manual

Page: 124 / 738

5: Commands and Levels
EDS-MD® Wired IoT Device Gateway Command Reference 124
url <text>
Sets HTTP request URL following IP address or
hostname.
username <text> Sets the Username used to logon to HTTP server.
write
Stores the current configuration in permanent
memory.
connection 1 (config-action-ftp_put-connection:eth0 link state change:1) level commands
clrscrn Clears the screen.
default filename Sets default FTP remote Filename.
default port Sets default Port number.
default protocol Sets default FTP Protocol.
default username Sets default Username.
exit Exits to the next higher level.
filename <text> Sets FTP remote Filename.
host <text>
Sets FTP server IP address or hostname to be
connected to.
no host Clears FTP server IP address or hostname.
no password Sets default Password.
password <text> Sets the Password used to logon to FTP server.
port <number>
Sets the Port number which FTP server is listening
to.
protocol ftp Selects FTP Protocol.
protocol ftps Selects FTPS Protocol.
show Shows the current configuration.
show history
Displays the last 20 commands entered during the
current CLI session.
username <text> Sets the Username used to logon to FTP server.
write
Stores the current configuration in permanent
memory.
connection 2 (config-mach10-connection:2) level commands
clrscrn Clears the screen.
default host Restores the Hostname or IP address of Mach 10.
default mqtt host
Restores the Hostname or IP address of MQTT
server.
default mqtt port Restores the Port of MQTT server.
default port Restores the Port of Mach 10.
default proxy port Restores the Port of proxy server.
default proxy type Restores the default Proxy server type (SOCKS5).
exit Exits to the next higher level.
host <text> Sets the Hostname or IP address of Mach 10.
mqtt host <text> Sets the Hostname or IP address of MQTT server.
mqtt port <number> Sets the Port of MQTT server.
mqtt security disable Disables SSL for MQTT.
mqtt security enable Enables SSL for MQTT.
mqtt state disable Disables MQTT.
mqtt state enable Enables MQTT.
no proxy host
Restores the Hostname or IP address of the proxy
server.
no proxy password Restores the password for proxy server.