11: Maintenance and Diagnostics Settings
EDS-MD® Medical Device Server User Guide
86
Table 11-10 Traceroute Settings
To Perform a Traceroute
Using Web Manager
To perform a Traceroute, click
Diagnostics
in the menu and select
Traceroute
.
Using the CLI
To enter the command level:
enable, trace route <host>
Using XML
Not applicable.
Log
Table 11-11 Log Settings
To Configure the Diagnostic Log Output
Using Web Manager
To configure the Diagnostic Log output, click
Diagnostics
in the menu and select
Log
.
Using the CLI
To enter the command level:
enable -> config -> diagnostics -> log
Using XML
Include in your file:
<configgroup name=”diagnostics”>
and
Diagnostics:
Traceroute Settings
Description
Host
Enter the IP address or DNS hostname. This address is used to show the path
between it and the EDS-MD device when issuing the traceroute command.
Protocol
Select the traceroute protocol from the drop-down menu.
Submit (button)
Click the
Submit
button after entering traceroute information.
Diagnostics: Log
Description
Output
Select a diagnostic log output type:
Disable
- Turn off the logging feature.
Filesystem
- Directs logging to /log.txt.
Line (1 2
3 or 4
)
- Directs logging to the selected serial line.
Max Length
Set the maximum length of the log.txt file in Kbytes.
Note:
This setting becomes available when Filesystem is selected.
