Lantronix 100-120 VAC SLB, User Manual, Page: 244 / 344

12: Maintenance
SLB™ Branch Office Manager User Guide 244
3. You have the following options:

To add the defined event, click the Add Event button. The event displays in the Events
table at the bottom of the page.

To edit an event, select the event from the Events table and click the Edit Event button.
The
Maintenance > Events
page displays the event.

To delete an event, select the event from the Events table and click the Delete Event
button. A message asks for confirmation. Click OK .
4) To save, click Apply .
Events Commands
Go to Events Commands (on page 299) to view CLI commands which correspond to the web page
entries described above.
LCD/Keypad
The LCD has a series of screens, consisting of 2 lines of 24 characters each. Specific screens and
the display order can be configured. The keypad associated with the LCD can also be configured.
The types of screens include: current time, network settings, console settings, date and time,
release version, location, and custom user strings.
Enabling the
Auto-Scroll LCD Screens option enables scrolling through the screens and pausing
the number of seconds specified by the Scroll Delay between each screen. After any input to the
keypad, the LCD waits until the keypad has been idle for the number of seconds specified by the
Idle Delay before scrolling of the screens continues.
To configure the LCD and Keypad:
1. Click the Maintenance tab and select the LCD/Keypad option.
SNMP Trap OID Enter a unique identifier for an SNMP object. (An SNMP object is anything that can
hold a value and can be read using an SNMP "get" action.) The OID consists of a
string of numbers separated by periods (for example, 1.1.3.2.1). Each number is
part of a group represented by the number on its left.
Email Addresses Enter an email address to receive email alerts.