12: Maintenance
SLB™ Branch Office Manager User Guide
243
Figure 12-12 Maintenance > Events
2. Enter the following:
Event Trigger
From the drop-down list, select the type of incident that triggers an event. Currently,
the options are:
Receive Trap
Temperature Over/Under Limit (for Sensorsoft devices)
Humidity Over/Under Limit (for Sensorsoft devices)
Device Port Data Drop
Current Over Threshold
Power Inlet Status Change
No Internal Modem Dial Tone
Action
From the drop-down list, select the action taken because of the trigger. For
example, the action can be writing an entry into the syslog with details of the event
or sending the trap(s) to the Ethernet or modem connection.
Ethernet
For actions that require an Ethernet connection (for example,
Forward All Traps to
Ethernet
), select the Ethernet port to use.
Modem Connection
on
For actions that require a modem connection (for example,
Forward All Traps to a
Modem Connection
, select which device port or USB port with a modem
connection to use.
NMS/Host to forward
trap to
For actions that forward a trap, enter the IP address of the computer to forward the
trap to. The computer does not have to be an SNMP NMS; it just has to be capable
of receiving SNMP traps.
SNMP Community
Forwarded traps are sent with this SNMP community value
There is no default.
Summary of Contents for 100-120 VAC SLB
Page 114: ...8 Device Ports SLB Branch Office Manager User Guide 114 Figure 8 4 Device Ports Settings ...
Page 131: ...8 Device Ports SLB Branch Office Manager User Guide 131 Figure 8 10 Devices Power Outlets ...
Page 174: ...9 USB Port SLB Branch Office Manager User Guide 174 Figure 9 3 Devices USB Modem ...