background image

User Guide

1. Introduction

Welcome to the World of Mini-Networking.
In the modern business society, communication and sharing information is crucial. 
Computer networks have proven to be one of the fastest modes of communication.

Lantech palm Switch 500 is compacts and attractively designed for desktop use. 
It is an ideal solution for small offi ce or SOHO network user. The Switch provides 
wire-speed, Fast Ethernet switching function that allows high-performance, 
low-cost connection.

Palm Switch 500 will automatically detect the speed of the device that you plug 
into it to allow you to use both 10 and 100Mbps device. It features a store-and 
forward switching and it can auto-learn and store source address.

•Features

- Conforms to IEEE 802.3, 802.3u and 802.3x standard
- 5-Port 10/100M Fast Ethernet Switch
- Auto MDI/MDI-X for cascading
- N-way auto-negotiation supported
- Half-duplex for backpressure, full-duplex for fl ow control
- Store-and-forward switching architecture
- MAC address table : 1K
- Memory buffer sharing : 128K bytes
- LED indicators : Power, LK/ACT, FDX/COL,100              
- External power supply

•Size:

- 128mm(W) x 65mm(D) x 23mm (H) Palm size

1

Summary of Contents for palm 500













Reviews: