40
Switch settings interface
IP Configuration
User can configure the IP Settings and DHCP client function
DHCP Client:
To enable or disable the DHCP client function. When DHCP client
function is enabling, the industrial switch will be assigned the IP address from the
network DHCP server. The default IP address will be replace by the DHCP server
assigned IP address. After user click “Apply” button, a popup dialog show up. It is to
inform the user that when the DHCP client is enabling, the current IP will lose and
user should find the new IP on the DHCP server. To cancel the enabling DHCP
client function, click “cancel”
IP Address:
Assign the IP address that the network is using. If DHCP client function
is enabling, and then user don’t need to assign the IP address. And, the network
DHCP server will assign the IP address for the industrial switch and display in this
column. The default IP is 192.168.16.1
Subnet Mask:
Assign the subnet mask of the IP address. If DHCP client function is
enabling, and then user do not need to assign the subnet mask
Gateway:
Assign the network gateway for the industrial switch. The default gateway
is 192.168.16.254
DNS1:
Assign the primary DNS IP address
DNS2:
Assign the secondary DNS IP address
