16
Hardware Installation
In this paragraph, we are going to explain how to install IPES-0008A-12V Industrial
Switch and the installation points to be attended to it.
Installation Steps
1. Unpack the Industrial switch packing.
2. Check if the DIN-Rail bracket is screwed on the Industrial switch or not. If the bracket
is not screwed on the Industrial switch, please refer to
DIN-Rail Mounting
section for
DIN-Rail installation. If the user wants to mount the Industrial switch on the wall, then
please refer to
Wall Mounting
section for wall mount plate installation.
3. To hang the Industrial switch on the DIN-Rail or wall, please refer to the
Mounting
Installation
section.
4. Power on the Industrial switch. Please refer to the
Wiring the Power Inputs
section
for knowing the information about how to wire the power cord. The power LED on the
Industrial switch will light up. Please refer to the
LED Indicators
section for indication
of LED lights.
5. Prepare the twisted-pair, straight through CAT.5/above cable for Ethernet connection.
6. Insert one side of the RJ-45 cable into the Industrial switch Ethernet port and another
side to the network device
’s Ethernet port, e.g. Switch, PC or Server. The Ethernet
port (RJ-45) LED on the Industrial switch will light up when the cable is connected
with the network device. Please refer to the
LED Indicators
section for LED light
indication.
7. When all connections are set and LED lights all show in normal, the installation is
complete.
