Lantech IGS-L5408MGSFPR-AC, User Manual

Page: 15 / 24

14
3.2. Wiring the Power Inputs
Please follow the steps below to insert the power wire.
AC model
Connect the power cords to the connectors on the Ethernet switch and to the
appropriate power sources.
DC model
1. Insert DC power wires into the co and
– of the terminal block connector.
2. Tighten the wire-clamp screws for preventing the wires from loosing.
[NOTE] The wire gauge for the terminal block should be in the range between 12 ~ 24
AWG.