Lantech IGS-2206C, User Manual

Page: 37 / 118

30
HTTP server
no security telnet G Disable IP security of
telnet server
switch(config)# no security telnet
Port Commands Set
Commands Level Description Example
interface fastEthernet
[Portid]
G Choose the port for
modification.
switch(config)# interface
fastEthernet 2
duplex
[full | half]
I Use the duplex
configuration
command to specify
the duplex mode of
operation for Fast
Ethernet.
switch(config)# interface
fastEthernet 2
switch(config-if)# duplex full
speed
[10|100|1000|auto]
I Use the speed
configuration
command to specify
the speed mode of
operation for Fast
Ethernet., the speed
can
‘t be set to 1000 if
the port isn
‘t a giga
port..
switch(config)# interface
fastEthernet 2
switch(config-if)# speed 100
no flowcontrol I Disable flow control of
interface
switch(config-if)# no flowcontrol
security enable I Enable security of
interface
switch(config)# interface
fastEthernet 2
switch(config-if)# security enable
no security I Disable security of
interface
switch(config)# interface
fastEthernet 2
switch(config-if)# no security
bandwidth type all I Set interface ingress switch(config)# interface