HR-114 II 1 WAN 4 LAN Broadband Router
HR-114 II 1 WAN 4 LAN Broadband Router
12
User Guide
13
6.
INTERNET BROADBAND ROUTER CONFIGURATION
First make sure that the network connections are functioning normally.
This Internet Broadband Router can be confi gured using Internet Explorer 4.0 or
newer web browser versions.
Login to the Internet Broadband Router :
Before you confi gure this device, note that when the Broadband Router is
confi gured through an Ethernet connection, make sure the host PC must
be set on the IP subnetwork that can be accessed by the xDSL/Cable
modem. For example, when the default network address of the xDSL/Cable
modem Ethernet interface is 192.168.1.x, then the host PC should be set at
192.168.1.xxx (where xxx is a number between 2 and 254), and the default
subnet mask is 255.255.255.0.
1. Open Internet Explorer 4.0 or above Internet browser.
2. Enter IP address http://192.168.1.1 (the factory-default IP address
setting) to the URL web address location.
3. When the following dialog box appears, remain blank (fi rst login) or enter
the password and press Login to enter the main confi guration window.
Note:
If needed to set a password, then refer to the
Administrator Setting.
4. After entering the password, the main web page comes up, there are two
