8
Off
Half-duplex mode or link down
LNK/ACT
(Fiber)
Green
Link up
Blinks
Transmitting
Off
Link down
FDX/COL (Fiber)
Amber
Full-duplex mode
Off
Link down
DIP-switch
The DIP-switch is used to configure operation mode for LLF (
Link Lost Forwarding)
and operation mode for Copper/Fiber port. The default value of Dipswitch is
OFF
.
10/100/1000Base-T to 1000Base-FX converter module
S/W No
Status
Description
1
ON
LLF Enable
OFF
LLF Disable
2
ON
Pure converter mode
OFF
Switch converter mode
3
ON
Reserved
OFF
Reserved
Link Lost Forwarding:
When LLF is enabled, it will allow copper port link failure to be
reported to the Fiber side and also allow Fiber link failure to be reported to the copper
side. Therefore, a link loss forward feature is provided in both copper and Fiber side.
Pure Converter mode
: When pure converter mode is enabling (on), it operates with
the minimum latency. The transmission flow does not wait until entire frame is ready,
but instead it forwards the received data immediately after the data being received.
