background image

24

25

11. WARRANTY

Limited Consumer Product 

Warranty

While we take great care and pride in ensuring that our 

products are of the highest quality, we recognise that 

very occasionally things may go wrong.
Our guarantee covers any faults which affect the performance of the pump mechanism for 1 year and other product 

components of our breast pump for 90 days.
This guarantee does not apply to cosmetic, accidental damage, improper use, incorrect voltage use, everyday wear 

and tear, faults or damage that are a result of your misuse of the pump, and pumps which have been modified or 

multiple-person use.
This guarantee applies to customers in the UK. For health and hygiene reasons our breast pumps should not be 

re-sold, and our guarantee does not apply to any subsequent owners.
Where your breast pump develops a fault that is covered by our guarantee we will repair or replace the breast pump 

or the affected parts. This may mean we provide one or more replacement parts to you. We may ask you to return 

the pump and/or faulty components for testing or repair.
To make a claim under this guarantee, you should tell us about the fault by contacting us at 

lansinoh.co.uk/

contact-us/

 . You will need to provide us with proof of purchase of the breast pump or parts. We will then 

notify you of next steps.

YOUR STATUTORY RIGHTS ARE NOT AFFECTED.

For more information on your rights contact your local consumer advice centre or go online.

This guarantee is provided by Lansinoh Laboratories Inc, Ground Floor, West Mayesbrook 
House, Lawnswood Business Park, Leeds, LS16 6QY.

Declaration for Electromagnetic Compatibility (EMC)

For information use only

FCC Statement: This device complies with part 15 of the FCC rules. Operation is subject to 
the following two conditions: (1) This device may not cause harmful interference, and (2) 
this device must accept any interference received, including interference that may cause 
undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital 
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable 
protection against harmful interference in a residential installation. This equipment generates, 
uses and can radiate radio frequency energy, and if not installed and used in accordance with 
the instructions, may cause harmful interference to radio communications. However, there 
is no guarantee that interference will not occur in a particular installation. If this equipment 
does cause harmful interference to radio or television reception, which can be determined by 
turning the equipment off and on, the user is encouraged to try to correct the interference by 
one or more of the following measures:

• 

Reorient or relocate the receiving antenna.

• 

Increase the separation between the equipment and receiver.

• 

Connect the equipment into an outlet on a circuit different from that to which the 
receiver is connected.

• 

Consult the dealer or an experienced radio/TV technician for help.

Stacking:

 This device should not be used adjacent to or stacked with other equipment. And 

if adjacent or stacked use is necessary, this device should be observed to verify normal 
operation in the configuration in which it will be used.

Disposal:

 The symbol which can be found on the product or on the package surface indicates 

that the product shall not be disposed with other household wastes. It is the users responsibility to 
properly dispose of the product, or facilitate recycling activities. For further information about the 
recycling collection points, please contact your local authority or Lansinoh Customer Service.

Technical Data

 

Bluetooth version 4.1

Range up to 10m

Power Requirements

AC Adapter (included)
100-240 VAC wall plug type
AC adapter, galvanically isolated 
adapter with 9Vdc output voltage.
Batteries (not included) 6 AA batteries, 
1.5V alkaline 
The expected use life of the pump is 
500 hours.

To maintain your power adapter 

follow these instructions:

Type BF applied part

Keep the device dry

Keep the device away from sunlight

Indicates the temperature limitation 

for operation, transport and storage. 

Indicates the humidity limitation for 

operation, transport and storage. 

Follow instructions for use

Identifies the manufacturer

Indicates the protection against 

ingress of solid foreign objects and 

against harmful effects due to the 

ingress of water

Class II equipment

Do not dispose of electric/electronic 

devices together with unsorted 

municipal waste

SYMBOLS ON THE 

PACKAGING

MEANING OF THE SYMBOLS

Transport/

Storage

20%

95%

Transport/

Storage

-4° F

+122° F

Operation

41° F

104° F

Operation

20%

80%

DO NOT use power adapter if damaged.

!

Warning: Children have STRANGLED in cords. 

Keep the cords out of the reach of children.

DO NOT wrap cord of 

power adapter around 

the plug body.

CORRECT

DO NOT unplug 

power adapter by 

pulling on the cord.

CORRECT

TS EN 60601-1-2 STANDARD TEST REQUIREMENTS

Immunity Test Levels for ENCLOSURE PORT

Phenomenon

Basic EMC 

standard or 

test method

IMMUNITY TEST LEVELS

Professional healthcare 

facility environment

HOME 

HEALTHCARE 

ENVIRONMENT

ELECTROSTATIC 

DISCHARGE

IEC 61000-4-2

± 8 kV contact 

± 2 kV, ± 4 kV, ± 8 kV, ± 15 kV air

Radiated RF EM fields 

a)

IEC 61000-4-3

3 V/m

f)

 

80 MHz – 2,7 GHz 

b) 

80 % AM at 1 kHz 

c)

10 V/m

f)

 

80 MHz – 2,7 GHz 

b) 

80 % AM at 1 kHz 

c)

Proximity fields from RF 

wireless communications 

equipment

IEC 61000-4-3

See 8.10

RATED power frequency 

magnetic fields 

d) e)

IEC 61000-4-8

30 A/m 

g) 

50 Hz or 60 Hz

Summary of Contents for SM ARTPUMP 2.0
















Reviews:

Related manuals for SM ARTPUMP 2.0