3
4
Basic Controls, Display and Features
1
Power, On/Off button
2
Cycle increase/decrease button
3
LCD screen
4
Suction increase/decrease button
5
Let-Down button
6
Cycle indicator
7
Time/level indicator
8
Low battery indicator
9
Let-Down/Stimulation Phase indicator
10
Expression Phase indicator
11
Suction indicator
Tubing Adapter Input
If you are using the Lansinoh
®
Affinity
®
Breast Pump for the first time,
it is important to read the full instruction manual before you begin.
Start with Phase I (Let-Down Phase)
Turn on power by pressing the On/Off button.
This will take you into Phase I – the Let-Down
Phase.
Phase II (Expression Phase)
The pump will automatically switch into Phase II
after two minutes.
If you want to bypass or reduce Phase I, press
the Let-Down button.
The pump will switch to Phase II immediately.
Adjust suction
While you are in Phase I or Phase II, you may
adjust suction level by pressing (+) or (-) next
to the suction icon.
Adjust cycle
While you are in Phase II, you may adjust the
cycle level by pressing (+) or (-) next to the
cycle icon.
Change to Phase I (Let-Down Phase)
At any time during the Expression Phase, you
can switch back to Phase I (Let-Down Phase)
by pressing the Let-Down button.
Stop pumping
Turn the pump off with the On/Off button.
L1
up to
L8
L1
up to
L6
Indicator in
LCD screen
Quick Start Instructions
Pump Diagram
1
2
3
4
5
6
7
11
10
9
8