Lansinoh 2-in-1 Double Electric Breast Pump
Read All Instructions Before Using:
•
Always unplug this product immediately after using
•
Do not use while bathing
•
Do not place or store this product where it can fall or be pulled into a tub or sink
•
Do not place or drop pump into water or other liquid
•
Do not reach for an electrical product that has fallen into water. Unplug immediately
Warning: To reduce the risk of burns, electrocution, fire, or injury to persons:
•
This product should never be left unattended when plugged in
•
Close supervision is necessary when this product is used near children or invalids
•
Use this product only for its intended use as described in this manual. Do not use
attachments not recommended by the manufacturer
•
Never operate this product if it has a damaged cord or plug, if it is not working properly, if it
has been dropped or damaged, or dropped into water
•
Keep the cord away from heated surfaces
•
Never use while sleeping or drowsy
•
Never drop or insert any object into any opening or tubing
•
Do not use this product if it is broken or any parts are missing
•
Do not allow small children or pets to play with the pump unit, AC adaptor, etc.
•
Do not use outdoors with the AC adapter or operate where aerosol spray products are being
used or where oxygen is being administered.
Before Each Use…
• Always wash hands thoroughly with soap and water before handling the Breastmilk Expression Set,
the pump body, or other attachments.
• Disassemble the Breastmilk Expression Set to clean. Set aside the tubing as it does not need to be
washed or sterilised.
• Do not operate the pump if liquid or moisture is visible in the tubing, but thoroughly dry it first
before use if there are any signs of moisture. 04. Cleaning Instructions Unless otherwise instructed
by your healthcare provider, follow these sterilisation and cleaning instructions. Sterilisation 1. Prior
to using the set for the first time, disassemble and boil for 10 minutes all parts of the Breastmilk
Expression Set that come into contact with breastmilk. The Set includes all parts except for the pump
base, plug, tubing and tubing connector.
• Note: Ensure you use enough water to keep parts afloat while boiling.
• Note: Do not boil the tubing and tubing connector. 2. Remove all parts from water immediately
after boiling. 3. Completely air dry before assembly and next use.
• Note: Partially dried parts may affect operation of the pump. Please ensure parts are completely
dry before use. Cleaning
• Set aside the tubing and tubing connector. These items do not need to be washed or sterilised
because the diaphragm prevents them from coming into contact with the breastmilk.
