LANSCHE AUDIO
OPERATING INSTRUCTIONS No.5.1
Page 7 / 18
2.3. Connecting the Speakers
CAUTION:
Please turn off your amplifier before connecting any speakers. Supply
power to your No.5.1 only after all necessary connections have been
made to your audio/video components.
The following types of connections are possible:
- 4.0-mm banana plugs
Plugged directly into the open sockets. It is not necessary to screw them on.
- Spades (6mm)
Fastened by loosening the terminal „wing nuts‟ and then tightening the spade firmly onto
the gold-plated contact surface.
2.3.1. Connecting the amplifier (single)
For every connection, make sure to maximize the contact area and tightly secure the
components to avoid loss of sound quality due to contact resistance. For a continuously
secure and corrosion-free connection, the surfaces of all connecting components should
also be gold plated if possible. Check to make sure that the stripped cable ends are not
touching each other at either the amplifier or speaker. Tighten the screw connections after a
few days, as any of the fasteners may have loosened up.
