9
This switch can be either installed on the standard 19-inch mountable rack
or located on the desktop.
To install the switch on the desktop, please follow the steps:
3.2 Installation
3.2.1 Desktop Installation
1)
Set the switch on a flat surface strong enough to support the
entire weight of the switch with all fittings.
2)
Remove the adhesive backing papers from the rubber feet.
3)
Turnover the switch and attach the supplied rubber feet to the
recessed areas on the bottom at each corner of the switch.
Please unplug the power cord before installing or
removing the switch.
Caution:
Please avoid any heavy thing placed on the switch.
Caution:
Figure 4. Attaching Rubber Feet
4)
Upturn the switch and connect it to the network devices while
keep enough ventilation space around.
5)
Connect the switch to power source with the provided power
cord.
