www.lanpro.com
Wireless - Equipments - 123 Manual - LP-N24 V2.0 - 2.4 GHz Wireless-N Broadband Router
and/or Access Point (AP) - Installation in Router and AP mode through WPS PIN.
6
16
In your LP-N24 V2.0 an encryption key is generated and
the algorithm type is modified, which cannot be modified.
Thereafter if you want to modify it, you must restore the
factory default values of your equipment. Please, check the
file LPN24V2_M123_END01.pdf.
The configuration through WPS method is not always
assertive. Sometimes it must be repeated until the desired
connection result is obtained, as well as the generation of
keys. In case any configuration inconvenience through this
process persists, we recommend you to use the traditional
configuration method through AP mode and manual key
assignment.
The communication process between wireless devices for
the configuration through WPS in its two modalities, PBC and
PIN, depends on the external conditions of the environment
and the influence they may have on the wireless signal.
14
15
Select Start PIN as shown in Figure 12.
Notice how the negotiation of the connection is happening.
You will also see how it is automatically added to the
connection profiles and sets, as shown in see Figure 13.
Figure 12
Figure 13
Figure 14
