www.lanpro.com
Wireless - Equipment - 123 Manual - LP-C290N
300 Mbps Wi-Fi Access Point (AP) - Configuración as an Access Point
4
12
13
Assign an IP address inside the LP-C290N segment to your
Network Card. The LP-C290N has a default IP address of
192.168.1.1, hence, we will use a different one in our
network card like: 192.168.1.2; please see Figure 2
, and
remember that IP addresses cannot be repeated in your
network. Proceed to select OK twice as shown in
figure 9
Proceed to open your preferred browser and with the LP-C290N IP address. In this case, use the default address 192.168.1.1,
as shown in
Figure 10.
Figure 9
Figure 10
10
11
Now go to your Network Card properties, as
shown in
figure 7
Select the TCP/IP protocol
and properties again as
shown in
figure 8
Figure 8
Figure 7
