www.lanpro.com
Wireless - Equipment - LP-570G - Fast Installation Guide, setup as an Access Point (AP)
5
Input a Network Key of your preference, as shown
in figure 14. The key should be between 8 and 63
characters long. Then select:
“Next”.
This Key will
be the one used by the clients that connect to the
WLAN.
14
Figure 14
In the next window shown in figure 15, you will be
prompted to confirm the parameter. Select:
“Next”
to accept.
15
Figure 15
In the window shown in figure 16, please select the
physical card that provides the Internet Service and
then select:
“Next”.
16
Figure 16
Proceed to confirm the WLAN AP creation by
selecting:
“Finish”
in the figure 17.
17
Figure 17
The configuration message will pop-up, meaning
your card is ready to receive connections from other
equipment.
18
Figure 18
It is important to mention this is not a full-blown AP, it is only a simple solution for sharing Internet
service through your operating system.
