www.lanpro.com
Wireless - Equipment - 5.8 GHz - LP-289ai 123 Configuration Manual in Client Mode
14
In this example we will generate the same keys used
in the AP and will stablish the same authentication and
encryption mode. In order to do this, we must select
in figure 14, in authentication mode by selecting:
Shared key
and in encryption: 64 bits WEP, we will
input the passphrase used in the AP and next select:
Generate keys
. With this procedure the same keys
will be generated for the Client LP-289ai. Then we
will select Key 1 which is active in the AP and finally
select:
Apply
.
Figure 14
15
In this case a message will pop-up, shown in figure
15 with the information indicating that the keys apply
to all security , then select:
OK.
Figure 15
16
Wait for 30 seconds and verify the connectivity of the equipment. In order to do this you can:
Figure 16 a
a
Send a Ping to the destination AP , see figure 16a.
6
