www.lanpro.com
3
123 Manual, LP-1540ai High Powered 300 Mbps Access Point for the 2.4 GHz WiFi band
for Outdoor service, PoE powered with Múltiple Physical and Virtual interfaces that supports VLAN
and has an EIRP of 27dBm(0.5W). Template up-loading.
3
4
5
6
7
Please proceed to remove the base as shown in
figure 3
in order to start the installation.
Fix the equipment on the selected location, as shown in
figure 4.
You must decide how to power the LP-1540ai, via the AC mains power supply or through the PoE option.
IMPORTANT
Do not powering the equipment through both ways because can be damaged.
Remember that a network connection and AC mains should be available at the location where the LP-1540 is going to be
installed or the network plus PoE power circuit connection.
Figure 3
Figure 4
Proceed to connect the LP-1540ai as shown in paragraph
number 4
. Once connected, please proceed to configure it.
Connect the PC or Laptop to the data network where the
LP1540ai is connected, as shown in
figures 2.1, 2.2, 2.3
and
2.4
