- 1 -
Chapter 1 Notes and Safety Requirements
1.1 Cautions and Notes
(1)
To avoid danger or damage incurred to the lens or lens, do not touch the lens or
sensor directly with your fingers.
(2)
To avoid failure or electric shock hazard and so on, do not disassemble or
modify the internal structure of the device.
(3)
Do not plug in or unplug the power connection port when hands are wet.
(4)
Do not use alcohol and other organic solvents to clean.
(5)
If the lens or sensor is dirty or damp, you should better use dry and non-linen
fabric or professional lens tissue to wipe them. To avoid scratches on the
surface, do not touch the lens with your fingers. Wipe the lens or sensor lightly.
(6)
The products are not specifically designed for an outdoor use. Do not expose it
to outdoor environment without any protection. Excessive temperature and
humidity will damage the lens. Please avoid using the product under the
following environment: high temperature or high humidity environment, places
with direct sunlight, dirt or vibration and places near heat source.
(7)
Please use and store in the following environment:
Operating temperature
：
0
℃
~ 40
℃
Storage temperature
：
-20
℃
~ 60
℃
Operating Humidity
：
30~60%RH
Storage Humidity
：
10~80%RH
(8)
If any foreign matter, water or liquid enter into the device by accident,
disconnect the Power line immediately. Please send it to the maintenance center
and do not use the hair dryer to dry it by yourself.
(9)
To prevent microscope from being tripped over or dropped, please put away the
device's connect cable in use or standby.
(10)
To avoid electric shock by accident, please power off microscope before you
move your display or equipment.
(11)
The cleanliness of the device lens will directly affect clarity degree of contents
from the computer screen during preview. Problems like various circles or spots
on the screen may mostly be incurred by dirt on the lens. When cleaning, please
use professional lens tissue or other professional detergent to clear the dirt on
the lens.
(12)
Registered trademark and copyright: Copyright ownership of this product
belongs
to
Lanoptik Technologies Ltd
Without
written authorization of this
company, any organizations or individuals shall not
photocopy, print, or
translation to another language to any part of this
document.
User Manual | Digital
Comparison Microscope BD1
601
www.lanoptik.com
