Lanner NCA-6040, User Manual

Page: 39 / 116

NCA-6040 User Manual
39
5. Next, we install the fans to the PCIe
bracket. Secure the fan with four (4)
screws each.
6. Then, connect the fan power cables to
the Riser Card.
7. Pick up the PCIe bracket, unscrew the
four (4) screws on the side to remove the
side metal partition. And unscrew the
three (3) screws to remove the metal
holder.
8. Align the DPU module to the PCIe socket.
Slide the DPU module into the PCIe
socket until it is completed seated.
Make sure the side bar slides in properly
(as pictured below).
Side Metal Partition
Metal Holder