Lanner nca-5510, User Manual

Page: 2 / 97

Network Computing Platforms
Revision History
This document contains proprietary information of Lanner Electronics Inc. –and is not to be
disclosed or used except in accordance with applicable agreements.
Copyright © 2018. All Rights Reserved.
Copyright© 2015 Lanner Electronics Inc. All rights reserved. The information in this document
is proprietary and confidential to Lanner Electronics Inc. No part of this document may be
reproduced in any form or by any means or used to make any derivative work (such as
translation, transformation, or adaptation) without the express written consent of Lanner
Electronics Inc. Lanner Electronics Inc. reserves the right to revise this document and to make
changes in content from time to time without obligation on the part of Lanner Electronics Inc. to
provide notification of such revision or change.
The information in this document is furnished for informational use only, is subject to change
without notice, and should not be construed as a commitment by Lanner Electronics Inc. Lanner
Electronics Inc. assumes no responsibility or liability for any errors or inaccuracies that may
appear in this document or any software that may be provided in association with this document.
Rev Date Descriptions
0.1 2015/08/06 Preliminary
1.0 2015/11/03 Official release
1.1 2015/12/01 Added BIOS chapter
1.2 2016/04/22 Added maximum heights for SATA storage tray
1.3 2017/08/24
Updated motherboard layout, Jumpers and Connectors
List, and Jumper Setting and Connector Pin-out
1.4 2018/08/21
Modified Pin Assignment for LCM