Chapter 4: Hardware Setup
21
Installing the System Memory
The motherboard comes with one DDR3 SO-DIMM socket. Please follow the steps below for installation.
1.
Align the memory module’s key with the SO-DIMM socket’s key.
2.
Install the SO-DIMM until firmly seated.
3.
Place the heat sink onto the memory module.
Note
:
1.
SO-DIMMs for installation should meet the required frequency which is 1066/1333 MHz for this system.
Do not install SO-DIMM supporting different frequencies.
2.
The motherboards can support up to 2 GB memory capacity in maximum.
