IIOT-I531 User Manual
26
6. Next, thermal pad placement.
Remove the protective film on the
Thermal Pad (included in accessory
pack) and gently place on the Wi-Fi
module.
7. Make sure to place the metal bracket
back on top and secure with three (3)
screws, after installing the RF antenna
cables.
Installing Wi-Fi Antennas
1. Locate the two (2) antenna hole
placement (A1, A2). Locate the two
(2) IPEX connectors on the Wi-Fi
module.
2. Connect RF cables to the IPEX
connectors on the Wi-Fi module and
screw the other end of the cables in
the antenna holes.
3. Then, screw the two (2) antennas on
the front panel of the system.
Front Panel
A1
A2
A2
A1
